10x Supermicro SuperServer 6027TR-DTRF 2-Node Server X9DRT-HF CTO No CPU/Mem/HDD

Chassis P/N: 6027TR-DTRF

Node P/N: X9DRT-HF

In Good Condition, Full Working Order

Tested, 2 Year Warranty

CTO Configure-To-Order

CTO Server, no memory, no CPU, no HDD included - required in order to operate, we can quote to supply if required

Included

• 10 x Supermicro SuperServer 6027TR-DTRF 2-Node Server Chassis
  • 12 x 3.5" SAS / SATA Hard Drive Bays With 12 x Hard Drive Caddies
  • Backplane - Super SAS-827HD
  • 2 x 1280W Power Supply - PWS-1K28P-SQ
  • 2 x Server Nodes Each With:
    • Motherboard - X9DRT-HF rev 1.21A
    • 2 x Heatsinks
    • Backplane Adapter - BPN-ADPX9-6SATA rev 1.21
    • 1 x 2U Riser Card W/ 3 PCI-E x8 Twin MBs - RSC-R2UT-3E8R rev 1.00

Full Manufacturers specification:

Product SKUs SYS-6027TR-DTRF SuperServer 6027TR-DTRF (Black) Motherboard Super X9DRT-HF Processor/Cache CPU Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP *) Note † BIOS version 3.0 or above is required Cache Up to 30MB System Bus QPI up to 8 GT/s System Memory Memory Capacity 8x 240-pin DDR3 DIMM slots Up to 512GB DDR3 ECC LRDIMM Up to 256GB DDR3 ECC Registered memory (RDIMM) Memory Type 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB Memory Voltage 1.5 V, 1.35 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset Intel® C602 Chipset SATA SATA 2.0 & 3.0 with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Network Controllers Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics Matrox G200eW Input / Output (per Node) Serial ATA 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) LAN 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port USB 3x USB 2.0 ports total (2x rear + 1x Type A) VGA 1x VGA port Serial Port / Header 1x Fast UART 16550 port / 1 Header

Chassis Form Factor 2U Rackmount Model CSE-827HD-R1K28B Dimensions Width 17.25" (438mm) Height 3.47" (88mm) Depth 28.5" (724mm) Gross Weight 85 lbs (38.6kg) Available Colors Black Front Panel Buttons Power On/Off button System Reset button UID button LEDs Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED Expansion Slots (per Node) PCI-Express 3x PCI-E 3.0 (x8) slots (1x Low-profile and 2x Full-height half-length) Drive Bays (per Node) Hot-swap 6x 3.5" Hot-swap SATA3/SATA2 HDD trays System Cooling Fans 4x 8cm heavy duty PWM fans with optimal fan speed control Power Supply 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 AC Input 1000W Output @ 100-140V, 8-12A, 50-60Hz 1280W Output @ 180-240V, 6-8A, 50-60Hz DC Output 1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A Certification Platinum Certified System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)