Fast UK, EU and Worldwide Delivery with DHL Express and UPS

Home / Racking / Rack Accessories  /  2 x Gigamon 4-Port 10G PoE G-TAP A-TX Splitter In 3-Slot 1U Rackmount Adapter
2 x Gigamon 4-Port 10G PoE G-TAP A-TX Splitter In 3-Slot 1U Rackmount Adapter
2 x Gigamon 4-Port 10G PoE G-TAP A-TX Splitter In 3-Slot 1U Rackmount Adapter
2 x Gigamon 4-Port 10G PoE G-TAP A-TX Splitter In 3-Slot 1U Rackmount Adapter
2 x Gigamon 4-Port 10G PoE G-TAP A-TX Splitter In 3-Slot 1U Rackmount Adapter
2 x Gigamon 4-Port 10G PoE G-TAP A-TX Splitter In 3-Slot 1U Rackmount Adapter

2 x Gigamon 4-Port 10G PoE G-TAP A-TX Splitter In 3-Slot 1U Rackmount Adapter

product brand: Gigamon
product condition: Used
excluding vat: £199.50
including vat: £239.40
information
2 x Gigamon 4-Port 10G PoE G-TAP A-TX Splitter In 3-Slot 1U Rackmount Adapter
Model: G-TAP A-TX
In Good Condition And In Full Working Order
Tested
1 Year Warranty
Included:
  • 2 x Gigamon 4-Port 10G PoE G-TAP A-TX Splitter In 3-Slot 1U Rackmount Adapter
The GigaTAP A Series is a line of network TAPs designed with the Gigamon "Always On" architecture. This one-of-a-kind architecture eliminates network link downtime on network connections through the use of up to four power sources, including alternating current (AC), direct current (DC), Power over Ethernet (PoE), and on-board battery backup. While using any of the primary forms of power (AC, DC, PoE), the unique design of G-TAP A Series constantly charges the integrated backup battery, which allows it to assume power load in the event of a primary power failure. This eliminates link downtime associated to link renegotiation on the network devices connected to the TAP.
Features and Benefits
  • Functionality
    • Full line-rate traffic mirroring
      • Copy 100% of network traffic including errors, non-standard network traffic, and network packets that do not conform to established protocol standards enabling detailed analysis, security, and monitoring
    • Multiple network and tool interfaces
      • Copper 10/100/1000 UTP & SFP
      • Fiber Multimode 1/10G LC & SFP/SFP+
      • Fiber Singlemode 1/10G LC & SFP/SFP+
      • Direct-Attach 10G SFP+
      • Media conversion SFP/SFP+
    • Copper Ethernet Fail-to-Wire
  • Management
    • Remote management using CLI via: Telnet, SSH
    • Remote management using GUI via
    • GigaVUE-FM
    • SNMP Traps via SNMP v1, v2, and v3
  • Physical
    • 1.75in Height, 5.5in Width, 9.75in Depth
  • Power
    • Alternating Current (AC): 100 to 240 V, 47 to 63 Hz, nominal 18 mA @ 120 V
    • Direct Current (DC): -36 to -72 V, nominal 350 mA @ -48 V, reverse-polarity protected inputs
    • Power over Ethernet (PoE): Type 1 (802.3af) - CAT3 or higher Type 2 (802.3at) - CAT5 or higher
Bootlog

G-Tap> showsystem
Management portIP: 10.63.2.44
G-Tap> m
========================================================================
System Information
========================================================================
System Name : G-TAP-ATX S/N=1720-8111, rev=E0, HW Built=09/15/2015
SW Version : 2.2.27 Filename=gta2227.bin
App LoaderVer : 2.04
Current : Tue Feb 28, 2023 08:09:59
System Boot : Tue Feb 28, 2023 08:09:45
------------------------------------------------------------------------
TelnetAccess : Enabled, Timeout=300 seconds
Console baud : 115200 bps
------------------------------------------------------------------------
Power Supply : AC adapter=[ON] DC -48V=[OFF] PoE=[OFF]
------------------------------------------------------------------------
Battery : Charging Capacity=0% Voltage=2219mV
------------------------------------------------------------------------
DIP Switch : Switch setting has priority oversoftware command
------------------------------------------------------------------------
G-Tap>

 
SA 291218 291219

to request a price please fill out the form below...


close