APC Symmetra PX 48kVA 48Kw 3 Phase UPS SYCF48KH All-In-One 16 x Battery Modules
APC Symmetra PX 48kVA 48Kw 3 Phase UPS SYCF48KH All-In-One 16 x Battery Modules
APC Symmetra PX 48kVA 48Kw 3 Phase UPS SYCF48KH All-In-One 16 x Battery Modules
APC Symmetra PX 48kVA 48Kw 3 Phase UPS SYCF48KH All-In-One 16 x Battery Modules
APC Symmetra PX 48kVA 48Kw 3 Phase UPS SYCF48KH All-In-One 16 x Battery Modules

APC Symmetra PX 48kVA 48Kw 3 Phase UPS SYCF48KH All-In-One 16 x Battery Modules

mpn: SYCF40KH
product brand: APC
product condition: Used
excluding vat: £7,600.01
including vat: £9,120.01
information
APC Symmetra PX 48kVA 48Kw 3 Phase UPS SYCF48KH All-In-One 16 x Battery Modules
In Good Condition, Fully Tested And In Full Working Order
Included:-
1 x APC Symmetra PX 48kW All-in-One Frame 400V SYCF48KH (With LCD Panel) Containing;
Cards - Battery Monitor, XR Communications Card, External Switch Gear Monitor Card, Network Management Interface, 2 x System Power Supply
1 x APC Static Switch SYSW48KH
1 x APC Bypass Switch Panel
16 x APC SYBTU2-PLP Symmetra PX 9Ah Battery Unit, High Performance
3 x APC SYPM10K16H Symmetra PX Power Module 10/16kW 400V
2 x Intelligent Module - SYMIM16
4 x APC PDM1316IEC-3P IT Power Distribution Module 3x1 Pole 3 Wire 16A 3xIEC309 300cm, 360cm, 420cm
2 x APC PDM1332IEC-3P IT Power Distribution Module 3x1 Pole 3 Wire 32A 3xIEC309 300cm, 360cm, 420cm

Output

Max Configurable Power (Watts)
48.0kWatts / 48.0kVA
Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Output Voltage Distortion
Less than 2 %
Output Frequency (sync to mains)
50 Hz +/- 0.1 % For 50 Hz nominal Unsynchronised, 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz Sync to mains, 60 Hz +/- 0.1 % For 60 Hz nominal Unsynchronised
Other Output Voltages
380, 400, 415
Topology
Double conversion online
Waveform type
Sine wave
Overload Operation
10 minutes at 125% and 60 seconds at 150%
Output Voltage THD
< 2% for 0 to 100% linear load and < 6% for full non-linear load
Output Voltage Tolerance
+/- 1% static and +/- 5% at 100% load step
Bypass
Built-in static bypass

Input

Input frequency
40 - 70 Hz
Input voltage range for main operations
340 - 477V
Input Total Harmonic Distortion
Less than 5 % for full load
Type of Input Protection Required
GL fuse
Other Input Voltages
380, 400, 415
Maximum Short Circuit Withstand (Icw)
30.0kAmps
Input Power Factor at Full Load
0.99

Batteries & Runtime

Battery type
VRLA
Included Battery Modules
4
Typical recharge time
3hour(s)
Nominal Battery Voltage
+/- 192 V (split battery referenced to neutral)
End of Discharge Maximum Battery Current
165.0A
RBC Quantity
4
Battery Charge Power (Watts)
4.593kWatts
DC Overcurrent Protection
1008A
Extendable Run Time
1
End of Discharge Battery Voltage
+/- 154 V
Efficiency in Battery Operation
94.0 %
Maximum Available Short Circuit Current
4kAmps
Overload Operation
10 minutes at 125% and 60 seconds at 150%

Communications & Management

Interface Port(s)
DB-9 RS-232, SmartSlot
Control panel
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Yes
Available SmartSlot™ Interface Quantity
2

Physical

Maximum Height
1991MM, 199.1CM
Maximum Width
600MM, 60.0CM
Maximum Depth
1070MM, 107.0CM
Net Weight
796.0KG
Shipping weight
858.0KG
Shipping Height
2140MM, 214.0CM
Shipping Width
848MM, 84.8CM
Shipping Depth
1210MM, 121.0CM
Color
Black

Environmental

Operating Temperature
0 - 40 °C
Operating Relative Humidity
0 - 95 %
Operating Elevation
0 - 1015.9meters
Storage Temperature
-15 - 40 °C
Storage Relative Humidity
0 - 95 %
Storage Elevation
0 - 15240meters
Audible noise at 1 meter from surface of unit
61.0dBA
Online thermal dissipation
7719.0BTU/hr
Protection Class
NEMA 1

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK


SL 249773 SN PD1049360010

specifications
  • MPN:
    SYCF40KH

to request a price please fill out the form below...


close