Fast UK, EU and Worldwide Delivery with DHL Express and UPS

Home / Networking / Cisco Networking / Cisco Network Switches  /  Cisco 2811 2800 Series ISR Integrated Services Router 10/100 Rackmount 1U
Cisco 2811 2800 Series ISR Integrated Services Router 10/100 Rackmount 1U
Cisco 2811 2800 Series ISR Integrated Services Router 10/100 Rackmount 1U
Cisco 2811 2800 Series ISR Integrated Services Router 10/100 Rackmount 1U

Cisco 2811 2800 Series ISR Integrated Services Router 10/100 Rackmount 1U

mpn: Cisco 2811
product brand: Cisco
product condition: Used
excluding vat: £23.75
including vat: £28.50
information
Cisco 2811 2800 Series ISR Integrated Services Router 10/100 Rackmount 1U
Model: Cisco 2811
In Full Working Order
Tested
Supplied With 2 Years Warranty
Not Supplied With Rack Ears
Included
  • 1 x Cisco 2811 2800 Series Integrated Services Router Rackmount 1U
Overview
The Cisco 2800 Series provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a five fold performance improvement, up to a ten fold increase in security and voice performance, new embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series.The Cisco 2800 Series features the ability to deliver multiple high-quality simultaneous services at wire speed up to multiple T1/E1/xDSL connections. The routers offer embedded encryption acceleration and on the motherboard voice digital-signal-processor (DSP) slots; intrusion prevention system (IPS) and firewall functions; optional integrated call processing and voice mail support; high-density interfaces for a wide range of connectivity requirements; and sufficient performance and slot density for future network expansion requirements and advanced applications.

 
Specification
  • DRAM
    • Default: 256 MB
    • Maximum: 768 MB
  • Compact Flash
    • Default: 64 MB
    • Maximum: 256 MB
  • Fixed USB 1.1 Ports: 2
  • Onboard LAN Ports: 2-10/100
  • Onboard AIM (Internal) Slot: 2
  • Interface Card Slots: 4 slots, each slot can support HWIC, WIC, VIC, or VWIC type modules
  • Network-Module Slot: 1 slot, supports NM and NME type modules
  • Extension Voice Module Slot: 0
  • PVDM (DSP) Slots on Motherboard: 2
  • Integrated Hardware-Based Encryption: Yes
  • VPN Hardware Acceleration (on Motherboard): DES, 3DES, AES 128, AES 192, and AES 256
  • Optional Integrated In-Line Power (PoE): Yes, requires AC-IP power supply
  • Console Port (up to 115.2 kbps): 1
  • Auxiliary Port (up to 115.2 kbps): 1
  • Minimum Cisco IOS Software Release: 12.3(8)T
  • Rack Mountable: Yes, 19- and 23-in. options
  • Wall Mountable: Yes
Power Requirements
  • AC Input Voltage: 100 to 240 VAC, autoranging
  • AC Input Frequency: 47-63 Hz
  • AC Input Current: 2A (110V) 1A (230V)
  • AC Input Surge Current: 50A maximum, one cycle
  • AC-IP Maximum In-Line Power Distribution: 160W
  • AC-IP Input Current: 4A (110V) 2A (230V)
  • AC-IP Input Surge Current: 50A maximum, one cycle
  • DC Input Voltage: 24 to 60 VDC, autoranging positive or negative
  • DC Input Current
  • 8A (24V)
  • 3A (60V)
  • Startup current 50A<10 ms
  • Typical Power Dissipation (No Modules): 32W (109 BTU/hr)
  • Power Dissipation-AC without IP Phone Support: 170W (580 BTU/hr)
  • Power Dissipation-AC with IP Phone Support-System Only: 210W (717 BTU/hr)
  • Power Dissipation-AC with IP Phone Support-IP Phones: 160W (546 BTU/hr)
  • Power Dissipation-DC: 180W (614 BTU/hr)
  • RPS: External only, connector for RPS provided by default
  • Recommended RPS Unit: Cisco RPS-2300 Redundant Power System
Environmental
  • Operating Temperature: 32° to 104°F (0° to 40°C)
  • Non-Operating Temperature: -40° to 158°F (-40° to 70°C)
  • Maximum Operating Temperature at Altitude
    • 40°C @ sea level
    • 40°C @ 6,000 ft (1800 m)
    • 30°C @ 13,000 ft (4000 m)
    • 27.2°C @ 15,000 ft (4600 m)
  • Operating Humidity: 5 to 85%RH, non-condensing
  • Dimensions (H x W x D)
    • 1.75 x 17.25 x 16.4 in.
    • (44.5 x 438.2 x 416.6 mm)
  • Rack Height: 1 rack unit (1RU)
  • Weight (Fully Configured): 14 lb (6.4 kg)
  • Noise Level (Min/Max)
    • 47 dBA for normal operating temperature (<90°F/32.2°C)
    • 57 dBA (@ maximum fan speed
Bootlog

Router#show version

Cisco IOSSoftware, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(15)T7,RELEASE SOFTWARE (fc3)

Copyright (c)1986-2008 by Cisco Systems, Inc.

Compiled Wed13-Aug-08 17:09 by prod_rel_team

ROM: SystemBootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Router uptime is2 minutes

System returnedto ROM by power-on

System image fileis "flash:c2800nm-advipservicesk9-mz.124-15.T7.bin"

This productcontains cryptographic features and is subject to United

States and local countrylaws governing import, export, transfer and

use. Delivery ofCisco cryptographic products does not imply

third-partyauthority to import, export, distribute or use encryption.

Importers,exporters, distributors and users are responsible for

compliance withU.S. and local country laws. By using this product you

agree to complywith applicable laws and regulations. If you are unable

to comply withU.S. and local laws, return this product immediately.

Cisco 2811(revision 53.50) with 249856K/12288K bytes of memory.

Processor boardID FCZ1317703Z

2 FastEthernetinterfaces

2 Virtual PrivateNetwork (VPN) Modules

DRAMconfiguration is 64 bits wide with parity enabled.

239K bytes ofnon-volatile configuration memory.

62720K bytes ofATA CompactFlash (Read/Write)

Configurationregister is 0x2102

Router# show inventory

NAME: "2811chassis", DESCR: "2811 chassis"

PID:CISCO2811 , VID: V06 , SN:FCZ1317703Z

NAME:"Virtual Private Network (VPN) Module on Slot 0", DESCR:"Encryption AIM Element"

PID:AIM-VPN/SSL-2 , VID: V01, SN: FOC131116A6

Router#

 
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
TH 278832 279526
specifications
  • MPN:
    Cisco 2811

to request a price please fill out the form below...


close