information
Cisco Aironet CleanAir 802.11n Wireless Radio Access Point AP AIR-CAP2602I-E-K9 with mounting bracket
AIR-CAP2602I-E-K9
In Good Condition, Full Working Order
Tested
Included:
- 1 x Cisco Aironet CleanAir 802.11n Wireless Radio Access Point AP AIR-CAP2602I-E-K9
Description:
- Cisco Aironet 2600 Series Access Point:
- 3 x 4 MIMO technology with three spatial streams
- standalone access point, IEEE 802.11 a/b/g/n
- Dual-band, Internal antennas and E regulatory domain
- Cross AP Noise Reduction, MIMO equalization
AIR-CAP2602I-E-K9 is 2600 series wireless access point in standalone mode, which offers a low-cost, entry-level solution with no requiring wireless controller. AAIR-CAP2602I-E-K9 offers base-level wireless functionality with the high-performance, high-flexibility to support unique requirement for scale and mobility services. Standalone model and controller base access point can be interchangeable by upgrade or downgrade the system IOS to satisfy the needs by add services over time by adding a controller, which means, a controller is required to support voice, location services, guest access, and advanced security.
2600 series standalone model deliver the highest level of IEEE 802.11n performance which sustains up to 450-Mbps data rate, and 3*4 MIMO technology with three-spatial stream provides optimal coverage to ensure best possible end user experience on the wireless network
Specifications:
802.11n Version 2.0 (and Related) Capabilities
- 3x4 multiple-input multiple-output (MIMO) with three spatial streams
- Maximal ratio combining (MRC)
- 802.11n and 802.11a/g beamforming
- 20- and 40-MHz channels
- PHY data rates up to 450 Mbps (40-MHz with 5 GHz)
- Packet aggregation: Aggregated MAC Protocol Data Unit (A-MPDU) (Tx/Rx), Aggregated MAC Protocol Service unit (A-MSDU) (Tx/Rx)
- 802.11 dynamic frequency selection (DFS)
- Cyclic shift diversity (CSD) support
Interfaces
- 10/100/1000BASE-T autosensing (RJ-45)
- Management console port (RJ-45)
Indicators
- Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions
- (W x L x H)
- Access point (without mounting bracket): 8.69x8.69x2.11in. (22.1x22.1x5.4)
Weight
- 2.3 lbs (1.04 kg) (2.7 lbs for external)
Environmental
- Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)
- Nonoperating (storage) Altitude Test: 25°C, 15,000 ft.
- Operating temperature: -4 to 131°F (-20 to 55°C)
- Operating humidity: 10 to 90 % (noncondensing)
- Operating Altitude Test: 40°C, 9843 ft.
System Memory
- 256 MB DRAM
- 32 MB flash
Input Power Requirements
- 44 to 57 VDC
Power Supply and Power Injector
- 100 to 240 VAC; 50 to 60 Hz
Powering Options
- 802.3af Ethernet Switch
- Cisco AP2600 Power Injectors (AIR-PWRINJ4=)
- Cisco AP2600 Local Power Supply (AIR-PWR-B=)
Power Draw
- 12.95W*
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
CS See RJ - 119
specifications
-
MPN:AIR-CAP2602I-E-K9
to request a price please fill out the form below...
close