information
Cisco CMS 1000 M5v2 / UCS C220 M5SX 1U CTO Server
Cisco Meeting Server 1000 - CTI-CMS-1K-M5V2-K9
Model - UCS C220 M5SX
New Open Box - Includes Original Box
Motherboard, Chassis, 1x Heatsink and 2x PSU Are Included
2 Year Warranty
CTO Configure-To-Order - No Processors, No Memory, No Hard Drives Included
Included
- 1 x Cisco CMS 1000 M5v2 UCS C220 M5SX 1U Rack Server with:
- 1 x Heatsink
- 10 x 2.5" SAS/SATA Hard Drive Bays
- 1 x Riser1 Card with 1x PCIe x16 Slot + MicroSD Slot
- 1 x Riser2 Card with 1 x PCIe x16 Slot
- 1 x MRAID Riser Card with 1x PCIe x8 Slot
- 7 x Internal Fans
- 1 x TPM Module UCSX-TPM2-002
- 2 x 770W Power Supplies UCSC-PSU1-770W
- 2 x UK Power Cords 72-0773-01
- 1 x Set Of Rackmount Rails 800-43375-01
Manufactures Specification:
- Chassis: One rack unit (1RU) chassis
- CPU: One or two 2nd Generation Intel Xeon scalable family CPUs
- Chipset: Intel C621 series chipset
- Memory: 24 slots for registered DIMMs (RDIMMs), load-reduced DIMMs (LRDIMMs), or through silicon via (TSV) DIMMs and support for Intel Optane Persistent Memory (PMem)
- Internal storage devices:
- Up to 10 SFF SAS/SATA hard drives (HDDs) or SAS/SATA solid state drives (SSDs).
- Optionally, up to two SFF NVMe PCIe SSDs (replacing SAS/SATA drives). These drives must be placed in front drive bays 1 and 2 only and are connected to riser 2. The rest of the bays (3 - 10) can be populated with SAS/SATA SSDs or HDDs. Two CPUs are required when choosing NVMe SSDs.
- Power subsystem: Up to two of the following hot-swappable power supplies:
- 770 W (AC)
- 1050 W (AC)
- 1050 W (DC)
- 1600 W (AC)
- 1050ELV (AC)
- One power supply is mandatory; one more can be added for 1 + 1 redundancy.
- Front Panel: A front panel controller provides status indications and control buttons
- Fans: Seven hot-swappable fans for front-to-rear cooling
- Expansion slots:
- Riser 1 (controlled by CPU 1):
- One full-height profile, 3/4-length slot with x24 connector and x16 lane.
- Riser 2 (controlled by CPU 2):
- One half-height profile, half-length slot with x24 connector and x16 lane.
- Dedicated RAID controller slot:
- An internal slot is reserved for use by the Cisco 12G SAS RAID controller or the Cisco 12G SAS HBA.
- Riser 1 (controlled by CPU 1):
- Interfaces:
- Rear panel
- One 1Gbase-T RJ-45 management port (Marvell 88E6176)
- Two 10Gbase-T LOM ports (Intel X550 controller embedded on the motherboard)
- One RS-232 serial port (RJ45 connector)
- One DB15 VGA connector
- Two USB 3.0 port connectors
- One flexible modular LAN on motherboard (mLOM) slot that can accommodate various interface cards
- Front panel
- One KVM console connector (supplies two USB 2.0 connectors, one VGA DB15 video connector, and one serial port (RS232) RJ45 connector)
- Rear panel
CS 303776 dup cpu dup dup .com
specifications
-
MPN:CTI-CMS-1K-M5V2-K9
to request a price please fill out the form below...
close