New Supermicro SuperServer SYS-1027GR-TRFT GPU/Xeon Phi 1U CTO Rack GPU Server

New Supermicro SuperServer SYS-1027GR-TRFT GPU/Xeon Phi 1U CTO Rack GPU Server

CTO SERVER - NO CPU, NO MEMORY, NO HDD INCLUDED - THESE ARE REQUIRED IN ORDER TO OPERATE - CLICK ASK A QUESTION IF YOU WOULD LIKE A QUOTE, WE CAN SUPPLY ANY CONFIGURATION REQUIRED

NEW GPU 1U Supermicro SuperServer, Model SuperServer 1027GR-TRFT, part number SYS-1027GR-TRFT

• Smart server management tools
• Intel X540 10GBase-T Controller
• 4x Hot-swap 2.5 SATA3 Drive Bays
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• 10x Counter rotating fans w/ optimal fan speed control
• 1800W Redundant Power Supplies 80Plus Platinum Level (94%+)
• Up to 512GB ECC DDR3, up to 1866MHz; 8x DIMM sockets
• 3 (x16) PCI-E 3.0 slots (GPU card opt.) 1 (x8) PCI-E 3.0 (in x16) low-profile slot
• Dual socket R (LGA 2011) supports Intel Xeon processor E5-2600 and E5-2600 v2 family

Product SKUs SYS-1027GR-TRFT SuperServer 1027GR-TRFT (Black) Motherboard Super X9DRG-HTF Processor/Cache CPU Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP) Note † BIOS version 3.0 or above is required Cache Up to 30MB System Bus QPI up to 8 GT/s GPU/Xeon Phi Support M2090, up to 130W CPU at 30°C M2075, up to 130W CPU at 35°C K10/K20/K20X/K1/K2 (Kepler), up to 130W CPU at 30°C Xeon Phi, up to 130W CPU at 30°C System Memory Memory Capacity 8x 240-pin DDR3 DIMM slots Up to 512GB DDR3 ECC LRDIMM Up to 256GB DDR3 ECC Registered memory (RDIMM) Up to 48GB DDR3 ECC and non-ECC UDIMM Memory Type 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB Memory Voltage 1.5 V, 1.35 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset Intel® C602 Chipset SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Network Controllers Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Graphics Matrox G200eW Input / Output SATA 2 SATA 3.0 ports (6Gbps) 2 SATA 2.0 ports (3Gbps) LAN 2x RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port USB 2 USB 2.0 ports Video 1 VGA Connector Keyboard/Mouse 1 PS/2 Keyboard/Mouse port Serial Port 1 Serial header System BIOS BIOS Type 16Mb SPI Flash EEPROM with AMI® BIOS BIOS Features Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.3 UEFI RTC (Real Time Clock) Wakeup

Chassis Form Factor 1U Rackmount Model CSE-118GQ-R1800B Dimensions Height 1.7" (43mm) Width 17.2" (437mm) Depth 31" (787mm) Gross Weight 48 lbs (21.8 kg) Available Color Black Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED Expansion Slots PCI-Express 3x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards) 1x PCI-E 3.0 x8 (in x16) low-profile slot Drive Bays Hot-swap 4x 2.5" Hot-swap drive bays System Cooling Fans 10x counter-rotating fans with optimal fan speed control Power Supply 1800W (1+1) Redundant 1800W power supply with PMBus AC Input 1000W Output @ 100-120V, 12-10A, 50-60Hz 1200W Output @ 120-140V, 12-10A, 50-60Hz 1800W Output @ 200-240V, 10-8.5A, 50-60Hz DC Output 1000W: +12V/84A; +5Vsb/4A 1200W: +12V/100A; +5Vsb/4A 1800W: +12V/150A; +5Vsb/4A Certification Platinum Certified PC Health Monitoring CPU Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 6-Phase-switching voltage regulator FAN Total of ten 4-pin PWM fans 10x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 10x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI LED Power Fail / Overheat LED Suspend-state Indicator LED UID LED Other Features SDDC Support Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Parts List - (Items Included)
	Part Number	Qty	Description
Motherboard / Chassis	MBD-X9DRG-HTF CSE-118GQ-R1800B	1 1	Super X9DRG-HTF Motherboard 1U Black SC118GQ Chassis
Air Shroud	MCP-310-11802-0N	1	Air Shroud for X9DRG used in SC118GQ-R1800B
Backplane	BPN-SAS-118G-4	1	4-port 1U direct-attached backplane, support up to 4x 2.5-inch SAS/SATA HDD/SSD
Cable 1	CBL-0333L	3	6+2 pin to 8 pin GPU power extension from MB, 30cm. 18/20AWG
Cable 2	CBL-0460L	1	8 Pin to Two 4 Pin Backplane Power Ext. 28/22cm. 18AWG
Cable 3	CBL-0157L-02	1	CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,27CM,28AWG
Cable 4	CBL-0228L	2	SATA,INT,ROUND,ST-RA,55CM,26AWG
Cable 5	CBL-0207L	1	SATA,INT,ROUND,ST-ST,59CM,26AWG
Cable 6	CBL-0227L	1	SATA,INT,ROUND,ST-RA,48CM,26AWG
Cable 7	CBL-0296L	5	4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG
Riser Card	RSC-R1UG-E16R-X9	1	RSC-R1UG-E16R-X9
Riser Card	RSC-R1UG-E16AR-X9	1	RSC-R1UG-E16AR-X9
Riser Card	RSC-R1UG-E16B-X9	1	RSC-R1UG-E16B-X9
Riser Card	RSC-R1UG-E16A-X9	1	RSC-R1UG-E16A-X9
Heatsink / Retention	SNK-P0047PS	1	1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB
Heatsink / Retention	SNK-P0047PSC	1	1U Passive Front CPU Heat Sink w/ a Side Air Channel for X9, X10 Systems Equipped with a Narrow ILM MB

VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£1400 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered

CS 196757 dup .com