|
549-4277-01
In very good condition and full working order
Included
-
12 x 146Gb Hot Plug Hard Drives 540-1797-01
-
2 x Expansion Tray Modules 375-3502-01
-
2 x 515w Power Supplies 300-2051-01
As a member of the Sun modular series of arrays, the Sun StorageTek™ 2540 array is specifically designed for a wide range of users. It brings together 4 Gb/sec FC host connectivity, SAS and SATA drive-side technology, and intuitive Sun StorageTek Common Array Manager software to create a robust solution that’s equally adept in an entrylevel storage area network (SAN) for the small to medium business (SMB) and integrating into an existing storage network within the enterprise.
Features
-
Supports existing FC infrastructures and entry-level SANs for low-cost growth
-
SAS technology ensures reliability with point-to-point architecture and dual-ported drives
-
Investment protection with autonegotiating 4 Gb/sec FC connectivity
-
Support for high-performance SAS and/or high-capacity SATA drives within the same tray addresses the needs of tiered storage and ILM solutions
-
Sun StorageTek Common Array Manager (CAM) software—simple to implement and manage with an intuitive and familiar user interface
-
Premium key-enabled features offer additional functionality and flexibility
Specifications
Sun StorageTek 2540 array
-
Controller card: Dual SAS RAID controller
-
Cache size: 512 MB (with ECC protection, up to 2 GB/system)
-
Host interfaces: Four FC host ports
-
Other interfaces: Two 10/100 Base-T Ethernet
-
RAID levels: 0, 1, (1+0), 3, 5, 6 (p+q)
-
Cache battery backup: Up to 72 hours (depending on cache size)
-
Dynamic capacity Expansion: Five to 48 drives – 730 GB to 48.0 TB Expansion tray: Up to three expansion trays
-
Drive depopulation: Scales from five to 12 hard disk drives per tray
-
Volume: Up to 256 (32/host)
-
Global hot spares: Up to 30
-
Maximum array capacity: 21.6 TB (450 GB SAS drives)
Disk drives
-
Form factor: 3.5-in., low –profile
-
Interface: Dual-ported SAS
Supported software
-
Sun Cluster Software
-
Sun StorageTek™ Enterprise Backup Software (EBS)
-
Veritas NetBackup (NBU)
-
Oracle® Database – Oracle Real Application Clusters (RAC)
-
Red Hat Enterprise Linux – Red Hat Cluster Suite
-
Windows Server 2003 – Server Cluster
Management software support
-
StorageTek Common Array Manager (CAM)
Operating system support
-
Solaris™ Operating System 9, 10 – and x86
-
Microsoft Windows 2003, 2008
-
SUSE Linux 9, 10
-
Red Hat Enterprise Linux 4, 5
-
VMware ESX 3.0.2 and higher
Host connectivity
-
Host/HBA/IP switches Multipath driver: The Solaris OS, as well as native drivers for other operating systems including Windows. RDAC drivers for Linux
-
All HBAs supported in SAN 4.4.12
Dimensions
-
Height x width x depth • 86.1 mm (3.39 in.) x 448.6 mm (17.66 in.) x 540 mm (21.26 in.)
-
Weight (maximum) • 59.55 lbs.
Power requirements
-
AC power: 515 W (+5V@19A/+12V@35A)
-
DC power: 17A max operating (-42 to -60 V DC)
Environmental (operating)
-
Temperature: 10°C to 40°C (50°F to 104°F) without battery, 10°C to 40°C (50°F to 104°F), 10°C to 35°C (50°F to 95°F) with battery
-
Relative humidity: 20-80% noncondensing
-
Operating altitude: 68.3 kPa (3,200m), 40°C, four-hour dwell
-
Operating shock: 5.5Gs, 11 ms, half-sine, 10 shocks per direction, all six directions
-
Operating vibration: All three axes: 0.25Gs, 5 to 500 Hz, swept-sine, five sweep cycles, one octave per minute
-
Heat output: 460 W (1,570 BTU/hr.)
Regulations
-
Safety and emissions: FCC Class A, VCCI Class A, EN55022 Class A, EN 55024 UL BSM, C-Tick, RoHS, and WEEE
-
NEBS Level 3: GR-63 CORE requirements, GR-1089 CORE requirements
|
