- 1 x Cisco 2811 2800 Series Integrated Services Router Rackmount 1U
- 1 x Cisco Dual-Port Fast Ethernet Network Module - 2FE2W
- 1 x Router WAN Interface Card - WIC-1T
- DRAM
- Default: 256 MB
- Maximum: 768 MB
- Compact Flash
- Default: 64 MB
- Maximum: 256 MB
- Fixed USB 1.1 Ports: 2
- Onboard LAN Ports: 2-10/100
- Onboard AIM (Internal) Slot: 2
- Interface Card Slots: 4 slots, each slot can support HWIC, WIC, VIC, or VWIC type modules
- Network-Module Slot: 1 slot, supports NM and NME type modules
- Extension Voice Module Slot: 0
- PVDM (DSP) Slots on Motherboard: 2
- Integrated Hardware-Based Encryption: Yes
- VPN Hardware Acceleration (on Motherboard): DES, 3DES, AES 128, AES 192, and AES 256
- Optional Integrated In-Line Power (PoE): Yes, requires AC-IP power supply
- Console Port (up to 115.2 kbps): 1
- Auxiliary Port (up to 115.2 kbps): 1
- Minimum Cisco IOS Software Release: 12.3(8)T
- Rack Mountable: Yes, 19- and 23-in. options
- Wall Mountable: Yes
- AC Input Voltage: 100 to 240 VAC, autoranging
- AC Input Frequency: 47-63 Hz
- AC Input Current: 2A (110V) 1A (230V)
- AC Input Surge Current: 50A maximum, one cycle
- AC-IP Maximum In-Line Power Distribution: 160W
- AC-IP Input Current: 4A (110V) 2A (230V)
- AC-IP Input Surge Current: 50A maximum, one cycle
- DC Input Voltage: 24 to 60 VDC, autoranging positive or negative
- DC Input Current
- 8A (24V)
- 3A (60V)
- Startup current 50A<10 ms
- Typical Power Dissipation (No Modules): 32W (109 BTU/hr)
- Power Dissipation-AC without IP Phone Support: 170W (580 BTU/hr)
- Power Dissipation-AC with IP Phone Support-System Only: 210W (717 BTU/hr)
- Power Dissipation-AC with IP Phone Support-IP Phones: 160W (546 BTU/hr)
- Power Dissipation-DC: 180W (614 BTU/hr)
- RPS: External only, connector for RPS provided by default
- Recommended RPS Unit: Cisco RPS-2300 Redundant Power System
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Non-Operating Temperature: -40° to 158°F (-40° to 70°C)
- Maximum Operating Temperature at Altitude
- 40°C @ sea level
- 40°C @ 6,000 ft (1800 m)
- 30°C @ 13,000 ft (4000 m)
- 27.2°C @ 15,000 ft (4600 m)
- Operating Humidity: 5 to 85%RH, non-condensing
- Dimensions (H x W x D)
- 1.75 x 17.25 x 16.4 in.
- (44.5 x 438.2 x 416.6 mm)
- Rack Height: 1 rack unit (1RU)
- Weight (Fully Configured): 14 lb (6.4 kg)
- Noise Level (Min/Max)
- 47 dBA for normal operating temperature (<90°F/32.2°C)
- 57 dBA (@ maximum fan speed
Router>showversion
Cisco IOSSoftware, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(10a), RELEASESOFTWARE (fc2)
Copyright (c)1986-2006 by Cisco Systems, Inc.
Compiled Wed11-Oct-06 19:01 by prod_rel_team
ROM: SystemBootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is0 minutes
System returnedto ROM by reload at 13:50:58 UTC Mon Sep 27 2021
System image fileis "flash:c2800nm-spservicesk9-mz.124-10a.bin"
This productcontains cryptographic features and is subject to United
States and localcountry laws governing import, export, transfer and
use. Delivery ofCisco cryptographic products does not imply
third-partyauthority to import, export, distribute or use encryption.
Importers,exporters, distributors and users are responsible for
compliance withU.S. and local country laws. By using this product you
agree to complywith applicable laws and regulations. If you are unable
to comply withU.S. and local laws, return this product immediately.
Cisco 2811(revision 53.50) with 512000K/12288K bytes of memory.
Processor boardID FCZ11327544
2 FastEthernetinterfaces
1Serial(sync/async) interface
DRAMconfiguration is 64 bits wide with parity enabled.
239K bytes ofnon-volatile configuration memory.
62720K bytes ofATA CompactFlash (Read/Write)
Configurationregister is 0x2102
Router>showhardware
Cisco IOSSoftware, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(10a), RELEASESOFTWARE (fc2)
Copyright (c)1986-2006 by Cisco Systems, Inc.
Compiled Wed11-Oct-06 19:01 by prod_rel_team
ROM: SystemBootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is0 minutes
System returnedto ROM by reload at 13:50:58 UTC Mon Sep 27 2021
System image fileis "flash:c2800nm-spservicesk9-mz.124-10a.bin"
This productcontains cryptographic features and is subject to United
States and localcountry laws governing import, export, transfer and
use. Delivery ofCisco cryptographic products does not imply
third-partyauthority to import, export, distribute or use encryption.
Importers,exporters, distributors and users are responsible for
compliance withU.S. and local country laws. By using this product you
agree to complywith applicable laws and regulations. If you are unable
to comply withU.S. and local laws, return this product immediately.
Cisco 2811(revision 53.51) with 512000K/12288K bytes of memory.
Processor boardID FCZ11327544
2 FastEthernetinterfaces
1Serial(sync/async) interface
DRAMconfiguration is 64 bits wide with parity enabled.
239K bytes ofnon-volatile configuration memory.
62720K bytes ofATA CompactFlash (Read/Write)
Configurationregister is 0x2102
Router>showinventory
NAME: "2811chassis", DESCR: "2811 chassis"
PID:CISCO2811 , VID: V05 , SN: FCZ11327544
NAME: "WANInterface Card - Serial (1T)", DESCR: "WAN Interface Card - Serial(1T)"
PID: WIC-1T= , VID: 1.0, SN: 35524954
NAME:"Unknown", DESCR: "Unknown"
PID:NM-2FE2W= , VID: 1.0, SN:JAB04390AEW
-
MPN:Cisco 2811
to request a price please fill out the form below...
close