Fast UK, EU and Worldwide Delivery with DHL Express and UPS

Home / Storage / All Dell EqualLogic Storage  /  Cisco 2811 2800 Series Integrated Services Router Rackmount 1U
Cisco 2811 2800 Series Integrated Services Router Rackmount 1U
Cisco 2811 2800 Series Integrated Services Router Rackmount 1U
Cisco 2811 2800 Series Integrated Services Router Rackmount 1U
Cisco 2811 2800 Series Integrated Services Router Rackmount 1U

Cisco 2811 2800 Series Integrated Services Router Rackmount 1U

mpn: Cisco 2811
product brand: Cisco
product condition: Used
excluding vat: £28.50
including vat: £34.20
information
Cisco 2811 2800 Series Integrated Services
Router Rackmount
Model: Cisco 2811
In Full Working Order
Tested
Supplied With 2 Years Warranty
Supplied With Rack Ears
Has A Few Marks On Top (please refer to pictures)
Included
  • 1 x Cisco 2811 2800 Series Integrated Services Router Rackmount 1U
Overview
The Cisco 2800 Series provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a five fold performance improvement, up to a ten fold increase in security and voice performance, new embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series.The Cisco 2800 Series features the ability to deliver multiple high-quality simultaneous services at wire speed up to multiple T1/E1/xDSL connections. The routers offer embedded encryption acceleration and on the motherboard voice digital-signal-processor (DSP) slots; intrusion prevention system (IPS) and firewall functions; optional integrated call processing and voice mail support; high-density interfaces for a wide range of connectivity requirements; and sufficient performance and slot density for future network expansion requirements and advanced applications.

 
Specification
  • DRAM
    • Default: 256 MB
    • Maximum: 768 MB
  • Compact Flash
    • Default: 64 MB
    • Maximum: 256 MB
  • Fixed USB 1.1 Ports: 2
  • Onboard LAN Ports: 2-10/100
  • Onboard AIM (Internal) Slot: 2
  • Interface Card Slots: 4 slots, each slot can support HWIC, WIC, VIC, or VWIC type modules
  • Network-Module Slot: 1 slot, supports NM and NME type modules
  • Extension Voice Module Slot: 0
  • PVDM (DSP) Slots on Motherboard: 2
  • Integrated Hardware-Based Encryption: Yes
  • VPN Hardware Acceleration (on Motherboard): DES, 3DES, AES 128, AES 192, and AES 256
  • Optional Integrated In-Line Power (PoE): Yes, requires AC-IP power supply
  • Console Port (up to 115.2 kbps): 1
  • Auxiliary Port (up to 115.2 kbps): 1
  • Minimum Cisco IOS Software Release: 12.3(8)T
  • Rack Mountable: Yes, 19- and 23-in. options
  • Wall Mountable: Yes
Power Requirements
  • AC Input Voltage: 100 to 240 VAC, autoranging
  • AC Input Frequency: 47-63 Hz
  • AC Input Current: 2A (110V) 1A (230V)
  • AC Input Surge Current: 50A maximum, one cycle
  • AC-IP Maximum In-Line Power Distribution: 160W
  • AC-IP Input Current: 4A (110V) 2A (230V)
  • AC-IP Input Surge Current: 50A maximum, one cycle
  • DC Input Voltage: 24 to 60 VDC, autoranging positive or negative
  • DC Input Current
  • 8A (24V)
  • 3A (60V)
  • Startup current 50A<10 ms
  • Typical Power Dissipation (No Modules): 32W (109 BTU/hr)
  • Power Dissipation-AC without IP Phone Support: 170W (580 BTU/hr)
  • Power Dissipation-AC with IP Phone Support-System Only: 210W (717 BTU/hr)
  • Power Dissipation-AC with IP Phone Support-IP Phones: 160W (546 BTU/hr)
  • Power Dissipation-DC: 180W (614 BTU/hr)
  • RPS: External only, connector for RPS provided by default
  • Recommended RPS Unit: Cisco RPS-2300 Redundant Power System
Environmental
  • Operating Temperature: 32° to 104°F (0° to 40°C)
  • Non-Operating Temperature: -40° to 158°F (-40° to 70°C)
  • Maximum Operating Temperature at Altitude
    • 40°C @ sea level
    • 40°C @ 6,000 ft (1800 m)
    • 30°C @ 13,000 ft (4000 m)
    • 27.2°C @ 15,000 ft (4600 m)
  • Operating Humidity: 5 to 85%RH, non-condensing
  • Dimensions (H x W x D)
    • 1.75 x 17.25 x 16.4 in.
    • (44.5 x 438.2 x 416.6 mm)
  • Rack Height: 1 rack unit (1RU)
  • Weight (Fully Configured): 14 lb (6.4 kg)
  • Noise Level (Min/Max)
    • 47 dBA for normal operating temperature (<90°F/32.2°C)
    • 57 dBA (@ maximum fan speed
Bootlog

Router#show ver

Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(7d), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 03-Jan-07 20:54 by alnguyen

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Router uptime is 0 minutes

System returned to ROM by reload at 18:03:35 UTC Wed Nov 2 2022

Cisco 2811 (revision 53.50) with 251904K/10240K bytes of memory.

Processor board ID FCZ111270BF

2 FastEthernet interfaces

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Router#show inv

NAME: "2811 chassis", DESCR: "2811 chassis"

PID: CISCO2811 , VID: V04 , SN: FCZ111270BF

Router#

 
SA 288610
specifications
  • MPN:
    Cisco 2811

to request a price please fill out the form below...


close